5
4
MONSTER POWER SIGNATURE PRO AVS 2000
FEATURES
1. Digital “Output/Input Voltage” Meter:
Indicates Output or Input voltage.
2. Digital “Voltage Correction” Meter:
Indicates the amount of voltage being increased or decreased in an effort
to maintain a consistent 230 volts.
3. Digital “Current Usage” Meter:
Indicates amperage draw.
4. “Ground OK” Indicator:
Indicates the Signature PRO AVS2000 is properly connected to a grounded wall outlet.
5. “Surge Protected” Indicator:
Indicates the Signature PRO AVS2000’s internal surge protection circuit is active.
6. “Line and Neutral OK” Indicator:
Indicates that the Signature PRO AVS2000’s L-N line is correctly wired to a
wall outlet.
7. “Normal Voltage Condition” Indicator:
Indicates power is between 80 volts AC and 140 volts AC.
8. “Switched On” Indicator:
Indicates power is being supplied to the switched outlets.
9. “Abnormal Voltage Condition” Indicator:
Indicates the incoming voltage is below approximately 80 volts AC
or above approximately 140 volts AC.
10. “Sequential Power ON/OFF” Switch:
Once the Automatic Voltage Stabilizer is plugged into a properly grounded
230 volts (nominal) outlet, pressing this button will provide AC power to the components plugged into the Automatic
Voltage Stabilizer’s Switched and Switched (Timed) outlets. Pressing this button again will turn off the Switched
and Switched (Timed) outlets. (Unswitched outlets remain on at all times.)
