background image

i

IMPORTANT SAFETY INFORMATION

Please read and observe the following safety points at all times.

 WARNING – Power Sources

Do not plug the Signature PRO AVS 2000 into a power outlet that differs from the source indicated for safe use on the 
Signature PRO AVS 2000. If you don’t know the type of electrical power that is supplied to your home, consult your local 
power company or a qualified electrician.

 WARNING – Grounding and Polarization

Do not force your Signature PRO AVS 2000 plug into an outlet that is not designed to accept grounded Schuko AC plugs. 
This plug is designed to be inserted into a grounded-type outlet only. If this plug doesn’t fit directly inside your outlet, 
do not attempt to force it into the outlet. Never attempt to dismantle the plug in any way (or alter the power cord). 
If you have questions about grounding, consult your local power company or a qualified electrician.

 WARNING – Liquid: Avoiding Electrical Shocks

A.  Do not operate your Signature PRO AVS 2000 if liquid of any kind is spilled onto or inside the unit. 
B.  Do not operate your Signature PRO AVS 2000 near rain or water that’s spilled or contained 

(e.g., bathtub, kitchen or sink).

Summary of Contents for Signature PROAVS2000

















Reviews: