PLUG INSTALLATION:
There are four plugs included with your Monsoon reservoir. Two are used on the convenient top fill
ports. PLEASE NOTE that for a limited time all Monsoon reservoirs are shipping with two FREE
Silver Bullet Antimicrobial Plugs--these are already installed in the top fill ports and you must remove
the rubber anti tarnish covers prior to use.
The other two plugs on the back are only used if you have opted for a single loop rather than a
dual/parallel configuration. The plug O rings are 13mm x 2.4mm and we have included two extra O
rings. The plugs are plated brass and feature an O ring retention channel to prevent the O ring from
migrating during installation. They are also “tool free” in that you do not need a screw driver or wrench
to tighten them as they have a 25mm diameter radial slot designed to accept any coin approximately the
size of a US quarter—about 25mm in diameter. As with all the other threaded holes, take care not to
over tighten or cross thread plugs and fittings.
PORT SELECTION:
Inlet and outlet ports are shown in the illustration below. If you're running a single loop setup, you can
use the inlet and outlet port of your choice and simply plug the others off with the included G1/4 Plugs.
If you chose to use a Silver Bullet Antimicrobial Plug in a back port (we recommend using the top
ports) do NOT use an outlet port as this can damage your reservoir because of depth limitations.
The reason we recommend top ports for the Silver Bullet Antimicrobial plugs is ease of replacement.
Top mounted fill port plugs can be removed without draining the water from your loop.
PAGE 4
Summary of Contents for M2 D5 Premium
Page 1: ......
