14
4.
After the connection is established, the Paired LED will cease blinking and illuminate
solid.
5.
If the Paired LED starts blinking slowly, the wireless connection has failed. Unplug
the subwoofer, wait for 3 minutes, then plug it back in and repeat steps 1-4.
Notes:
If the wireless connection fails again, check to see if there is a conflict or strong
interference from other electronic devices. Remove the conflicts or source of
interference, then repeat the pairing procedure.
The subwoofer should be located in an open area within 19 feet (6 meters) of the
soundbar.
If the soundbar is powered on and is not connected with the subwoofer, the
POWER indicator on the soundbar will flash. Repeat the above steps to establish a
wireless connection.
OPERATION
Power
When you first plug the soundbar into an AC power outlet, it is in Standby Mode.
Press the Power button on the soundbar top panel or IR remote control to power
the soundbar on.
Press the Power button again to put the soundbar back into Standby Mode.
If using the HDMI® ARC input, turning your TV on will turn the soundbar on at the
same time.
After about 15 minutes with no input, the soundbar will automatically switch to
Standby Mode.
Unplug the soundbar from the AC power outlet to turn the soundbar completely
off.
