15
Bluetooth Pairing
To use the Bluetooth® audio connection, you must first pair the soundbar with your mobile
device. Perform the following steps to pair the soundbar with your mobile device.
1.
Ensure that your mobile device is located within about 26 feet (8 meters) of the
soundbar. For best results, ensure they are within 3 feet (1 meter).
2.
Press the Power button on the soundbar top panel or on the IR remote control to
turn the soundbar on.
3.
Press the Source button on the soundbar top panel repeatedly until the LED
Indicator begins flashing blue, indicating the soundbar is in Bluetooth pairing mode.
Alternatively, press the BT button on the remote control. The soundbar will say
Pairing.
4.
Open the Bluetooth settings on your mobile device and scan for nearby Bluetooth
devices.
5.
Locate and select the SB200SW entry. If prompted for a passcode, enter 0000 (four
zeros). If you cannot locate the SB200SW entry, press and hold the
►
▮
/PAIR button
on the remote control until you hear the Pairing voice prompt.
6.
Once the soundbar is paired with your mobile device, the soundbar will say Paired
and the LED Indicator will stop flashing blue and will illuminate solid blue.
Notes:
To play audio from your mobile device, it must support the Advanced Audio
Distribution Profile (A2DP).
If your mobile device supports the Audio Video Remote Control Profile (AVRCP),
you can use the soundbar's remote control to control audio playback.
The soundbar has an unobstructed Bluetooth range of about 26 feet (8 meters). Any
obstacles between the soundbar and your mobile device will reduce that range.
If you lose connection, the soundbar will automatically re-enter Bluetooth pairing
mode.
If no device is paired with the soundbar within 2 minutes, the soundbar will restore
any previous Bluetooth pairing.
