16
Disconnecting Bluetooth
You can break the Bluetooth connection between the soundbar and your mobile device
using one of the following methods.
Press the Source button on the soundbar top panel or press one of the Source
buttons on the remote control other than the BT button to change the soundbar to
a different mode.
Disable Bluetooth on your mobile device. The soundbar will say Disconnected.
Press and hold the
►
▮
/PAIR button on the remote control.
TROUBLESHOOTING
Q1: There is no power.
A1: Ensure that the AC power cord is properly connected and plugged into an AC power
outlet. Ensure that the outlet is live by plugging in a different device, such as a lamp.
Press the Power button to turn the soundbar on. Try unplugging the soundbar, wait 30
seconds, then plug it back in again.
Q2: There is no sound.
A2: Increase the volume. Press the MUTE button on the remote control to ensure muting is
not on. Try playing audio from a different source. If using digital audio, ensure that
your TV or other audio source device is configured to output PCM audio. Try
connecting directly to your audio source device in case the TV does not pass through
the audio. Ensure that your TV's audio output is set to FIXED or STANDARD and is not
set to VARIABLE. If using a Bluetooth® connection, ensure that the volume on your
mobile device is turned up and that it is not muted.
