18
CARE AND MAINTENANCE
Regular care and maintenance will keep your Delta Pro 3D printer looking and operating
like new for years. The following procedures should be performed periodically.
•
Clean the printer's frame with a damp, lint-free cloth, such as a microfiber cloth.
•
Clean the glass build play with rubbing alcohol or another ammonia-free solvent
and a soft, lint-free cloth.
•
Lubricate the magnetic control arms with PTFE or lithium grease on at least a
monthly basis. This can be done by applying a small amount of grease onto the
magnet of the control arms, which function as a lubricant reservoir. After a few
prints, wipe away any excess grease from the ball joint using a lint-free cloth.
•
The carriages have been factory calibrated to ensure many thousands of hours of
consistent, precision movement. If after an extended period of time they seem
noisy, lubricate the wheels using silicone lubrication ONLY.
•
Use a dry brush to clean the extruder gear's teeth when they become clogged or
when the gear starts to slip.
•
Clean the LCD touchscreen display with the printer powered off using a soft cloth.
DO NOT use any solvents or cleaning fluids on the display.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
or through email by sending a message to [email protected]. Check the website for
support times and links.
