17
3.
Momentarily press the ENTER/INPUT button. The Display will show DRC with a
pointer to the left of the ENABLE label.
4.
If the value for ENABLE is OFF, momentarily press the INCREASE button to change
the value for ENABLE to ON.
5.
Momentarily press the ENTER/INPUT button. The Display will show DRC with the
pointer to the left of the THRESHOLD label.
6.
Use the INCREASE or DECREASE buttons to increase or decrease the THRESHOLD
value from -32dB to -2dB in 1.0dB increments.
7.
Momentarily press the ENTER/INPUT button. The Display will show DRC with the
pointer to the left of the RATIO label.
8.
Use the INCREASE or DECREASE buttons to increase or decrease the RATIO value
from 1.2:1 to 8.0:1 in 0.1 ratio increments.
9.
Momentarily press the ENTER/INPUT button. The Display will show DRC with the
pointer to the left of the LF OFFSET label.
10.
Use the INCREASE or DECREASE buttons to adjust the LF OFFSET value from -12dB
to +12dB in 1.0dB increments.
11.
Momentarily press the ENTER/INPUT button. The Display will show DRC with a
pointer to the left of the ENABLE label.
12.
Momentarily press the MENU/BACK button two times to return to the Home
Screen. Alternatively, wait about 30 seconds and the Display will automatically
return to the Home Screen. The Home Screen will display a DRC ON label, indicating
that DRC is enabled.
Note: Once a value is changed in any of the above steps, it will take effect whether or not
the ENTER/INPUT button is pressed. There is no Cancel function to abort changes that have
been made.
