11
OPERATION
1.
Turn the amplifier off by turning the POWER/VOLUME knob fully counterclockwise
past the click.
2.
Connect an audio source device to one of the inputs by following the instructions in
the
AUDIO INPUT CONNECTIONS section above.
3.
If automatic input selection is disabled, select the desired input by following the
Manual instructions in the INPUT SELECTION section above.
4.
Plug a pair of headphones with 3.5mm plug into the HEADPHONES jack on the
amplifier.
5.
If your audio source device has a volume control, put the volume at the midpoint.
6.
Start audio playback on your audio source device.
7.
Turn the POWER/VOLUME knob clockwise to a point just past the click to turn the
amplifier on.
8.
Slowly turn the POWER/VOLUME knob clockwise to increase the volume to a
comfortable listening level. If the POWER/VOLUME knob is fully clockwise and the
volume level is still too low, increase the output volume level on your audio source
device. Use the two volumes to find the desired listening level.
