28
Click the
button on the Control menu to access the Configuration Setting menu.
Network: Click the Network radio button to display the Network Configuration screen.
Source Label: Click the Source Label radio button to display the Source Label
Configuration screen.
Output Resolution: Click one of the radio buttons next to the desired resolution, then
click the Confirm button to make the change.
EDID Update: Insert a USB flash drive with the EDID update file into the FIRMWARE port
on the scaler/switch, then click the EDID Update button to perform the update.
Firmware Update: Insert a USB flash drive with the firmware update file into the
FIRMWARE port on the scaler/switch, then click the Firmware Update button to
perform the update.
Shutdown Timer (No Input): Use the pull-down list boxes to set the amount of time the
scaler/switch is inactive with no video input before it shuts down for both AUTO
and MANUal switching modes. The amount of time can be set to None (no
shutdown), 1 Minute, 2 Minutes, 5 Minutes, or 10 Minutes.
: Click the
icon to display the Control screen.
