19
CEC FUNCTIONALITY
The scaler/switch supports the HDMI® CEC function, which allows connected HDMI®
devices to be controlled using a single remote control. The CEC function can be turned on
or off using RS232 control. To turn it on, send the command 50686% and to turn it off send
the command 50687%. The scaler/switch responds as shown in the table below.
Condition
Functionality
CEC ON, Standby ON
Press the Standby button on the remote control to exit
Standby mode. All connected HDMI® source devices and
displays will also exit Standby mode.
CEC OFF, Standby ON
Press the Standby button on the remote control to exit
Standby mode. All connected HDMI source devices and
displays will remain in whichever mode they were in.
CEC ON, Standby OFF
Use the
,
, , , and
buttons on the remote
control to control the connected HDMI® source devices.
Press the Standby button on the remote control to enter
Standby mode. All connected HDMI source devices and
displays will also enter Standby mode.
CEC OFF, Standby OFF
The connected HDMI source devices cannot be controlled
using the included remote control.
Press the Standby button on the remote control to enter
Standby mode. All connected HDMI source devices and
displays will remain in whichever mode they were in.
