12
3.
Using a High Speed HDMI® Cable (not included), plug one end into the HDMI input
on your remote display, then plug the other end into the HDMI port on the HDBaseT
receiver.
4.
(Optional) If you want to control the video source devices from the remote
location, plug the included IR receiver or another wideband IR receiver into the IR IN
jack on the HDBaseT™ receiver.
5.
(Optional) If you want to control the remote display from the scaler/switch end,
plug the included IR transmitter or another wideband IR transmitter into the IR OUT
jack on the HDBaseT™ receiver.
6.
Using a High Speed HDMI® Cable (not included), plug one end into the HDMI input
on your local display, then plug the other end into the HDMI OUTPUT port on the
scaler/switch.
7.
(Optional) If you want to control the video source devices from the remote
location, plug the included IR transmitter or another wideband IR transmitter into
the IR OUT jack on the scaler/switch.
8.
(Optional) If you want to control the remote display from the scaler/switch location,
plug the included IR receiver or another wideband IR receiver into the IR IN jack on
the scaler/switch.
9.
(Optional) If the IR "eye" on the front panel will be blocked or obscured, such as
when the scaler/switch is installed in a closet or equipment cabinet, plug the
included IR receiver or another wideband IR receiver into the IR EYE jack on the
scaler/switch, then position the "eye" where it can receive IR signals from the
included remote control.
10.
Using a High Speed HDMI Cable (not included), plug one end into the 1-HDMI/MHL®
INPUT on the scaler/switch, then plug the other end into the HDMI output of your
HDMI video source device (e.g., Blu-ray Disc™ Player, DVD player, Camera, etc.).
Alternatively, using a passive MHL cable (not included), plug the HDMI end into the
1-HDMI/MHL INPUT, then plug the other end into the micro USB port on an MHL-
enabled Android™ smartphone or tablet.
