21
Remote Control
Press the STANDBY (1) button to enter or exit
Standby mode.
Press one of the five INPUT (2) buttons to
select that input.
Press the AUTO (3) button to enable or disable
Auto Switching.
Press the MUTE (4) button to turn volume
muting on or off.
Press the VOL (5) button to activate the
volume adjustment menu.
Press the "arrow" (6) buttons to move the
highlight when the OSD is displayed.
Press the OK (6) button to enter the
highlighted submenu, to edit the highlighted
entry, or to accept the edited value.
Press the EXIT (7) button to exit the displayed
menu or to cancel the editing operation.
Press the MENU (8) button to activate the
built-in OSD menu.
OSD Menu Control
The built-in OSD menu system allows you to control many of the basic parameters and
system settings. Perform one of the following steps to access the built-in OSD menu
system.
Press the MENU (
) button on the remote control.
Press and hold the AUTO/MENU button on the front panel for about 2 seconds.
