5
Rear Panel
1.
DC 12V: DC barrel connector for connecting the included AC power adapter.
2.
POWER LED: The LED illuminates red when power is applied.
3.
SDI IN 1: BNC connector for connecting an SDI video source.
4.
SDI IN 2: BNC connector for connecting an SDI video source.
5.
SDI OUT: BNC connector for connecting an SDI output device.
6.
SOURCE LED: The LED illuminates blue when an input signal is detected on SDI IN 1.
The LED blinks blue when an input signal is detected on SDI IN 2.
7.
FW: Micro USB port for performing firmware updates.
Side Panel
1.
DIP SWITCHES: 8 DIP switches for locking or unlocking the top panel buttons and
enabling or disabling external audio. The DIP switch is ON (1) when it is in the down
position and OFF (0) when it is in the up position. See the
DIP SWITCHES section for
details.
