6
PRODUCT OVERVIEW
Encoder/Transmitter
1.
HDMI OUT: HDMI® pass-through connector for connecting
a local display.
2.
HDMI IN: HDMI input for connecting the video source
device.
3.
RESET: Press the button to reset the Encoder to the factory
default values, including the IP address, encoding
information, and the default EDID® of 1920x1080p@60Hz.
4.
CAT OUT: RJ45 jack for connecting a Cat5e/6 Ethernet
cable for connecting to the Decoder, a computer, or an
Ethernet switch.
5.
IR OUT: 3.5mm jack for connecting the included IR
transmitter.
6.
LINK: The LED flashes blue when connected to the Decoder
or an Ethernet switch.
7.
POWER: The LED illuminates blue when power is applied.
8.
DC 5V: DC barrel connector for connecting one of the
included AC power adapters.
