9
nodE FUNCTION
The nodE function serves as a speed limiter for manual dims and fades.
When set to nod0, any manual dims or fades will occur in real time,
meaning that the light will dim or fade as fast as you move the slider. The
other nodE values (1-4) are progressively slower than real time. It is
recommended to use the nod1 value if using a low-res DMX controller.
PRESETS
Following is a list of the functions for the 16 built-in Presets:
#
Function
#
Function
00
Red
08
Green Strobe
01
Green
09
Blue Strobe
02
Blue
10
Amber Strobe
03
Amber
11
Cyan Strobe
04
Cyan
12
Violet Strobe
05
Violet
13
White Strobe
06
White
14
RGB Color Jump
07
Red Strobe
15
Multicolor Jump
MASTER/SLAVE MODE
Whenever the light is set to a mode other than a DMX address of Slave
mode (SL.AU), the fixture is in Master mode. For example, when set to
Sound Activation mode (So.UA), it is in Master mode. You can daisy-chain
additional fixtures to the Master fixture using 3-pin DMX cables. All other
connected fixtures must be set to Slave mode (SL.UA) and will perform the
same functions as the Master fixture. Note that the final fixture in the daisy-