7
DMX TERMINATION
As with all DMX devices, the last unit in any chain must have
a DMX terminator connected to the DMX Out connector If
using just a single light, connect a DMX terminator to the
DMX Out connector.
A DMX terminator is a DMX plug with a 120-ohm, 1/4-watt resistor soldered
between pins 2 and 3.
CONTROLS AND MENU DISPLAY
The 4-digit LED display indicates the mode and the value for the selected
function or mode. When the light is first plugged in, the display will show
the last DMX channel number set (d001 by default).
Press the MENU button to access the menu system.
Press the ENTER button to edit the currently displayed mode.
Press the UP button to increase the value of the selected function or
mode. Press and hold the button to rapidly increase the displayed
value. The list will cycle back to the beginning after the maximum
value is reached.
Press the DOWN button to decrease the value of the selected
function or mode. Press and hold the button to rapidly decrease the
displayed value. The list will cycle back to the end after the minimum
value is reached.
