9
4.
Open the Bluetooth® settings on your second device, then scan for nearby
Bluetooth connections.
5.
Locate and select the MP43251 entry. If prompted for a passcode, enter 0000 (four
zeros). Once connected, the Bluetooth LED Indicator will flash blue once every 10
seconds.
6.
If your second mobile device supports the AVRCP Bluetooth profile, you can use the
controls on the headphones to answer calls, adjust volume, play/pause playback,
and skip tracks.
7.
Open the Bluetooth settings on your first device and turn Bluetooth on. The first
device should connect with the headphones.
Note that you can stream audio from only one connected device at a time. If you want to
stream from the second device, you must stop playback on the first device.
Note that the selected audio codec is determined by the codecs supported on the two
devices. The priority order is aptX™ Low Latency, aptX™,
AAC, and SBC. If the two devices
do not support the same codecs, the SBC codec will be selected.
WIRED CONNECTION
If your audio device does not have Bluetooth® or if you prefer to not use Bluetooth, you
can plug the headphones directly into the audio output of your device.
1.
Plug one end of the included 3.5mm Audio Cable into the 3.5mm Audio Jack on the
headphones, then plug the other end into the headphones jack on your phone or
another 3.5mm audio source.
2.
Use the audio playback controls on your connected device to control playback. The
controls on the headphones do not function without a Bluetooth connection.
