8
BLUETOOTH PAIRING
1.
With the Headphones powered off, slide the Power Switch to the ON position. If
the headphones are not already paired with a mobile device or if the paired device
is off or out of range, the headphones will automatically enter Bluetooth® pairing
mode. The Bluetooth LED Indicator will flash red and blue alternately, indicating
that the headphones are in Bluetooth pairing mode.
Note: If already paired to a mobile device and that device is powered on and within
range, the headphones will automatically reconnect with that mobile device,
instead of entering Bluetooth pairing mode. If you want to pair a different mobile
device, press and hold the MFB, Volume -, and buttons at the same time
for 5 seconds to delete the pairing record.
2.
Ensure that your mobile device is within 3 feet of the headphones. Open the
Bluetooth® settings on your device and scan for nearby Bluetooth connections.
3.
Locate and select the MP43251 entry. If prompted for a passcode, enter 0000 (four
zeros). Once connected, the Bluetooth LED Indicator will flash blue once every 10
seconds.
4.
If your mobile device supports the AVRCP Bluetooth profile, you can use the
controls on the headphones to answer calls, adjust volume, play/pause playback,
and skip tracks.
MULTIPOINT PAIRING
You can pair a second device for streaming audio to the headphones.
1.
Follow the instructions in the
BLUETOOTH PAIRING section to pair your first device.
2.
Open the Bluetooth® settings on your first device and disable Bluetooth.
3.
With the headphones powered off, slide the Power Switch to the ON position. The
Bluetooth LED Indicator will flash red and blue alternately, indicating that they are
in Bluetooth pairing mode.
