5
AUDIO CONNECTION
Using the included 3.5mm Audio Cable, plug one end into the input on your speaker or
amplifier, then plug the other end into the 3.5mm Audio Jack on the receiver.
Note that if your speaker or amplifier has RCA inputs, use a 3.5mm to RCA audio cable
(available separately, P/Ns
, etc.).
BASIC OPERATION
Power On
With the receiver powered off, press and hold the MFB for 3 seconds. The LED will flash
blue 5 times, indicating that the receiver is powered on and ready to reconnect with a
previously paired device.
If no device was previously paired or if the paired device is powered off or out of range,
the receiver will automatically enter Bluetooth® pairing mode. The LED will flash red and
blue alternately, indicating that it is in Bluetooth pairing mode.
Power Off
With the receiver powered on, press and hold the MFB for 5 seconds. The LED will flash red
for about 1 second and the receiver will power off.
Reconnecting a Device
When the receiver is powered on, it will attempt to connect to a previously paired device.
If a device is reconnected, the LED will change to flashing blue once every 6 seconds.
