8
CHARGING
The internal battery should be charged before first use and at least once every month to
keep the battery fresh and capable of holding a full charge.
1.
When the LED begins to flash red, the battery is low and needs to be recharged.
2.
If power is on, press and hold the MFB for 5 seconds to turn the unit off.
3.
Plug one end of the included Micro USB Charging Cable into the Micro USB
Charging Port, then plug the other end into a wall charger, power bank, computer,
or other USB power source (available separately). The LED will illuminate solid red,
indicating that charging is in progress.
4.
When charging is complete, the LED will change to solid blue.
Note: If the charging power is sufficient, the receiver can be used while charging is in
progress. However, this can reduce the effective battery life, so we recommend against
doing so.
BLUETOOTH PAIRING
Pairing One Device
1.
With the receiver powered off, press and hold the MFB for 3 seconds to power it on.
The LED will flash blue 5 times. If a previously connected device is powered on and
in range, the receiver will automatically reconnect with that device, otherwise the
receiver will enter Bluetooth pairing mode and LED will flash red and blue
alternately.
2.
Open the Bluetooth settings on your device and search for nearby Bluetooth
devices.
3.
Locate and select the MP43245 entry. If prompted for a passcode, enter 0000 (four
zeros). After several seconds the devices will connect and the LED on the receiver
will flash blue once every 6 seconds.
