6
4.
Power on your receiving device (headphones, speakers, etc.) and put it into
Bluetooth® pairing mode.
5.
Place your receiving device next to the transmitter. They should pair within 5-30
seconds. Once paired, the LED Indicator will illuminate solid blue.
6.
Plug one end of the included 3.5mm Audio Cable into the 3.5mm Audio Jack on the
transmitter, then plug the other end into the headphones jack on your phone, mp3
player, television, etc.
7.
You are now ready to play audio and hear it on your receiving device.
Multipoint Connection
1.
Perform the steps in the
Bluetooth® Pairing and Connection section above.
2.
Double press the Multifunction Button to put the transmitter into Bluetooth pairing
mode. The LED Indicator flashes blue rapidly, indicating that it is in Bluetooth pairing
mode.
3.
Power on your second receiving device (headphones, speakers, etc.) and put it into
Bluetooth pairing mode.
4.
Place the second receiving device next to the transmitter. They should pair within 5-
30 seconds. Once paired, the LED Indicator will illuminate solid blue.
5.
If pairing is unsuccessful, turn off the transmitter, wait about 30 seconds, then turn
it back on and retry the pairing process for each device.
Note: The selected audio codec depends on which codecs are supported by each receiving
device. The codec priority is aptX
™
Low Latency, aptX, and SBC. The best quality codec
that is common to both devices will be selected.
