7
RECEIVER (RX) MODE
Bluetooth® Pairing and Connection
1.
With power off, slide the Operating Mode Switch to the RX position.
2.
Press and hold the Multifunction Button (MFB) for 3 seconds to power the unit on.
3.
Double press the Multifunction Button to enter Bluetooth® pairing mode. The LED
Indicator flashes red and blue alternately, indicating that it is Bluetooth pairing
mode.
4.
With your phone in close proximity to the receiver, open the Bluetooth settings and
scan for nearby Bluetooth devices.
5.
Locate and select the MP43244 entry. If prompted for a passcode, enter 0000 (four
zeros). The devices should connect within 5-30 seconds. Once connected, the LED
Indicator will illuminate solid blue.
6.
Using the included 3.5mm Audio Cable, plug one end into the audio input on your
speakers, amplifier, headphones, etc., then plug the other end into the 3.5mm Audio
Jack on the receiver.
7.
You are now ready to play music on your phone and hear it on your connected
device (speakers, amplifier, headphones, etc.).
Multipoint Connection
1.
Perform the steps in the
Bluetooth® Pairing and Connection section above.
2.
Double press the Multifunction Button to put the receiver into Bluetooth pairing
mode. The LED Indicator flashes red and blue alternately, indicating that it is in
Bluetooth pairing mode.
3.
With your second phone in close proximity to the receiver, open the Bluetooth
settings and scan for nearby Bluetooth devices.
4.
Locate and select the MP43244 entry. If prompted for a passcode, enter 0000 (four
zeros). The devices should connect within 5-30 seconds. Once connected, the LED
Indicator will illuminate solid blue.
