5
INSTALLATION
Perform the following steps to mount the speaker to a wall.
1.
Unscrew the two caps at the bottom of the speaker.
2.
Remove the back panel bracket from the speaker box.
3.
Use the image below as a guide for which mounting holes to use for the
installation. Use a pencil to mark the hole locations on the wall.
4.
Using an appropriately sized and type of drill bit for the type of wall, drill pilot
holes into the wall.
5.
If mounting to a drywall surface, insert wall anchors (not included) into the pilot
holes.
6.
Using appropriately sized and type of screws (not included), mount the bracket
to the wall.
