background image

SAFETY WARNINGS AND GUIDELINES 

Please read this entire manual before using this device, paying extra attention to these 
safety warnings and guidelines. Please keep this manual in a safe place for future 
reference. 

 

This speaker is intended for indoor use only. Do not expose this speaker to water 
or moisture of any kind. 

 

Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or 
detergents. For stubborn deposits, moisten the cloth with warm water. 

 

This speaker has no user serviceable parts. Do not attempt to open, service, or 
modify this device. 

 

INTRODUCTION 

Thank you for purchasing this Metro Wall Mount Speaker! We understand that a 
commercial sound system needs to be articulate and able to run 24/7. We also know 
that speakers should look good or blend into their environment. These Metro wall 
speakers do it all. They sound great for the spoken word or light background music 
(BGM) and have a minimal aesthetic that will not distract from the décor. 
The unique up-firing tweeter to a down-firing baffle and down-firing woofer allows 
installers to keep sound where it needs to go, off the walls and ceilings, minimizing 
reflections that cause phase and modulation that require more EQ and DSP. The 90° 
horizontal coverage gives these Metro wall speakers flexibility for mounting in several 
configurations. Simply mount a single unit to the wall for basic coverage or mount two 
side-by-side for full 180° coverage. Use the optional Quad Hanging Bracket (P/N 36378) 
to hang four in a center cluster for 360° of sound. 
 

FEATURES 

 

70V/100V constant voltage speaker rated for 13 and 25 watts 

 

Up to 104dB ±2dB sound pressure level 

 

60 Hz ~ 20 kHz frequency response 

 

Summary of Contents for 36377









Reviews: