6
PRODUCT OVERVIEW
Transmitter Front Panel
1.
POWER LED: The LED illuminates red when power is applied.
2.
FIRMWARE: USB port for connecting a flash drive to perform a firmware update.
3.
INPUT LED: The LED illuminates green when there is an input signal present.
4.
OUTPUT LED: A block of LEDs to indicate the condition of the input and output
signals:
HDMI: The single HDMI LED illuminates green when the HDMI® source signal
contains HDCP data. It blinks green when the HDMI source signal does
not contain HDCP data and is off when there is no HDMI source signal
present.
LINK: Each LINK LED illuminates green when there is a valid connection between
the transmitter and each of the four receivers.
HDCP: Each HDCP LED illuminates green when the corresponding receiver
supports HDCP and blinks green when the corresponding receiver does
not support HDCP. Each LED is off when there is no connected
corresponding receiver.
