8
26.
Turn the four volume knobs (MIC 1, MIC 2, MIC 3, and AUX 1) fully
counterclockwise to the 0 position.
27.
Place the TREBLE and BASS tone knobs in the middle/0 position.
28.
Insert the included AC power cord into the AC Power Connector on the Lectern
Column, then plug the other end into a nearby AC power outlet.
Congratulations, your lectern is assembled and ready for use!
OPERATION
Use the MIC 1 volume knob to control the volume level of audio from the
Gooseneck Microphone.
Use the MIC 2 volume knob to control the volume of a dynamic microphone
plugged into the 1/4" MIC 2 jack on the Lectern Column.
Use the MIC 3 volume knob to control the volume level of a condenser
microphone plugged into the Male 91 MC3M Amphenol connector on top of the
Lectern Column.
Use the AUX 1 volume knob to control the volume level of a line level audio
source connected to the AUX 1 RCA jacks.
Use the TREBLE and BASS tone controls to boost or cut the high and low
frequency volume levels.
Use the Lamp Switch on the underside of the Lectern Top to turn the Gooseneck
LED Lamp on or off.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with
any questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come
online to talk to one of our friendly and knowledgeable Tech Support Associates.
Technical support is available through the online chat button on our website
www.monoprice.com during regular business hours, 7 days a week. You can also get
assistance through email by sending a message to [email protected]
