7
15.
Using the screws removed in step 10 and a #2 Phillips screwdriver, attach the
Lectern Top to the Lectern Apron.
16.
Ensure that the Lamp Switch on the underside of the Lectern Top is in the off
position.
17.
Plug the Gooseneck Microphone into the MIC XLR connector on the upper side
of the Lectern Top.
18.
Plug the Gooseneck LED Lamp into the LAMP XLR connector on the upper side
of the Lectern Top. Note that this connector is for the lamp only. Plugging a
microphone into the connector will cause permanent damage to the
microphone and this XLR connector).
19.
(Optional) If you wish to use external speakers rather than the speakers in the
Lectern Column, attach the negative lead from the left channel speaker to the
black Channel 1 (Left) Speaker connector, then attach the positive lead to the
red connector.
20.
(Optional) If you wish to use external speakers rather than the speakers in the
Lectern Column, attach the negative lead from the right channel speaker to the
black Channel 2 (Right) Speaker connector, then attach the positive lead to the
red connector.
21.
(Optional) If you wish to use an auxiliary audio source (such as music before the
presentation), insert the left channel RCA plug from your external audio source
into the white AUX 1 RCA jack, then insert the right channel RCA plug into the
red AUX 1 RCA jack.
22.
(Optional) If you wish to record the presentation using an external audio
recorder, insert the left channel RCA plug from your recording into the white
REC OUT RCA connector, then insert the right channel RCA plug into the red REC
OUT RCA jack.
23.
(Optional) If you wish to use an external amplifier or sound system to replace or
augment the audio from this Lectern, plug the system input connector into the
PRE-OUT XLR jack.
24.
(Optional) If you wish to use an additional dynamic microphone, insert the 1/4"
plug from your dynamic microphone into the MIC 2 jack on the Lectern Column.
25.
Ensure that the Power Switch is in the off position.
