25
3.
Once the recording is finished, momentarily press the MODE button to end
recording and save the file. The recorded file will begin playback automatically.
RS-232 Control
This amplifier can be controlled remotely by a computer via the RS232 port on the rear
panel. After physically connecting to a computer, use a third party serial debugging
assistant software to connect to the amplifier using the following settings:
9600 baud rate
No parity
8 data bits
1 stop bit
The amplifier responds to the following commands:
1.
PC serial port issued instructions to get button data
Instructions: FF 05 00 05
2.
PC serial port issued instructions for the LED indicator
Instructions: FF 05 01 06
3.
PC serial port instructions for setting the priority level
Instructions: FF 05 02 07
4.
PC serial port issue instructions of get telephone, the remote switch
Instructions: FF 05 04 09
5.
PC serial port issue instructions of control MP3 connection ZONE1
OPEN: FF 06 81 87
CLOSE: FF 06 01 07
6.
PC serial port issue instructions of control MP3 connection ZONE2
OPEN: FF 06 82 88
CLOSE: FF 06 02 08
7.
PC serial port issue instructions of control MP3 connection ZONE3
OPEN: FF 06 83 89
CLOSE: FF 06 03 09
Summary of Contents for 18802
Page 18: ...18 Sample Connection Diagram ...
Page 19: ...19 Block Diagram ...