16
Monitor Connection
The amplifier provides a single-channel speaker output for connecting an 8-ohm
monitor speaker. Perform the following steps to connect a monitor speaker.
1.
Lift the bottom of the terminal cover over the MONITOR connectors.
2.
Using flat head or Phillips screwdriver, loosen the 1W + and 8Ω - screws.
3.
Insert the negative speaker wire lead under the 8Ω - screw plate, then tighten
the screw.
4.
Insert the positive speaker wire lead under the 1W + screw plate, then tighten
the screw.
5.
Flip the terminal cover for the MONITOR connectors down, then press on the
bottom to click it into place.
Setting Priority
By default, the priority order of inputs is as follows:
Channel 1, Telephone, Channel 2, Channel 3, Channel 4, Channel 5, Media Player
When the priority input contacts are closed/shorted, the priority order is:
Telephone, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Media Player
Perform the following steps if you wish to have the Telephone input take priority over
Channel 1.
1.
Lift the bottom of the terminal cover over the PRIORITY connectors.
2.
Using a flat head or Phillips screwdriver, loosen the two PRIORITY screws.
3.
Insert one end of a shorting wire under one of the screw plates, then tighten the
screw.
4.
Insert the other end of the shorting wire under the other screw plate, then
tighten the screw.
5.
Flip the terminal cover for the PRIORITY connectors down, then press on the
bottom to click it into place.
Summary of Contents for 18802
Page 18: ...18 Sample Connection Diagram ...
Page 19: ...19 Block Diagram ...
