33
9.
Ensure that the printer is powered off, then insert the SD™ card with your saved file
into the SD card slot to the left of the display on the front of the printer. Power the
printer on.
10.
Press the Print button. Locate a model on the SD card and press the filename to
select it. The Status screen will display.
11.
Press the Continue button to start printing the selected file.
12.
While printing is in progress, you can Pause, Resume, or Stop the print by pressing
the appropriate buttons. You can also adjust the Print Speed, Bed Temperature,
Extruder Temperature, and Fan Speed by pressing the Settings button.
13.
When the print operation is completed, the printer will start to cool down. A
progress bar will help you predict the amount of time needed for cool down.
14.
Once the cool down process has finished, you can remove the print from the build
plate. The best way to do so is with the included scraper.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
during regular business hours, 7 days a week. You can also get assistance through email by
sending a message to [email protected]
TROUBLESHOOTING
Q1: There is a clicking sound from one of the stepper motors.
A1: One of the stepper motors may not be connected properly. Check each connection
and then inspect the cable routing for any faults.