MONOPRICE
1000W Power Inverter
5
OPERATION
This inverter needs to be connected directly to the battery source. Use a pair of large
gauge cables (not included) for the connection.
1. Ensure that the power switch on the inverter is in the OFF position.
2. Connect the cables to the Input terminals on the power inverter. Connect the
black cable to the black/- terminal. Connect the red cable to the red/+ terminal.
Tighten the terminal lugs to ensure that the cables are securely connected.
3. Connect the black cable to the black/- terminal on the battery or to a grounding
point on the vehicle's chassis.
4. Connect the red cable to the red/+ terminal on the battery.
5. Ensure that power switch for your electrical appliance/device is in the OFF
position.
6. Plug your electrical appliance/device into the AC power output socket on the
inverter.
7. Switch the inverter ON.
8. Power on your electrical appliance/device.
WARNING!
Never turn on the inverter with a load connected. Always ensure that any
connected device is switched off before powering on the inverter.
WARNING!
Because electric motors draw huge amounts of power when starting up, do
not connect any device with a motor or compressor (such as a drill, refrigerator, or air
conditioning unit) that normally requires more than 333 watts of power to this inverter.
Devices with higher power requirements would exceed the inverter's rated capacity
when starting up.
Summary of Contents for 11565
Page 1: ......