Monomachine SFX-6 User Manual Download

Page: 147 / 158

C-1

Appendix C:
SYSEX
REFERENCE

This appendix lists all Monomachine SYSEX messages available for exter-
nal control.

Conventions:

Data printed with a $ sign is written in hexadecimal format.
Data printed with a % sign is written in a binary bitfield
format.

--------------------------
Monomachine SYSEX messages
--------------------------

All SYSEX messages start with this sequence.

A complete SYSEX message looks like this:

$f0,$00,$20,$3c,$03,$00,command,...,$f7

SYSEX global settings sysex dump:

SYSEX global setting dump request:

SYSEX kit sysex dump:

SYSEX kit request:

SYSEX unused:

  MIDI Byte | Purpose
------------+----------------------------
(SYSEX init)|
        $54 | None
        $f7 | SYSEX end

SYSEX set current kit name:

SYSEX set active global setting:

Summary of Contents for SFX-6































































































































































Search results

Summary of Contents for SFX-6

Reviews:

Related manuals for SFX-6

Brands by name

Popular brands

Monomachine SFX-6, User Manual

Search results

Summary of Contents for SFX-6

Reviews:

Related manuals for SFX-6

Brands by name

Popular brands