6
So schneiden Sie mit dem Hebelschneider (Abb. 2)
6. Getting ready to laminate
1. Site the machine so that there is enough space to insert the laminating
pouches (in other words, not right in front of a wall or other objects).
2. Insert the plug into an earthed power socket (220-240 V = domestic power supply).
3. Switch the machine on using the
ON/OFF
-switch
1
. The red power light
3
will
come on.
4. Select either hot or cold lamination by flipping the
HOT/COLD
switch
2
to the
desired position.
Note
: Your laminator supports lamination of 80 mic and 125 mic film without
mode-switching.
5. The green standby indicator
4
light appears as soon as the machine has reached
the right temperature.
The preheating time can vary depending on the ambient
temperature and air humidity.
7. General tips on laminating
After laminating
1. Set the
ON/OFF
switch
1
to
OFF
.
2. Pull the mains plug from its socket.
3. Leave the machine to cool.
Cleaning the rollers
1. Switch on the machine.
2. Fold a sheet of A4 paper and insert this, folded edge fi rst, into the pouch feed tray
5
. Keep repeating this process until no more glue deposits cling to the paper.
Cleaning the machine
1. Always remove the mains plug from its socket before cleaning the machine.
2. Let the machine cool down.
3. Always clean the machine with a soft cloth. Use neutral cleansing agents,
never abrasives.
5
