Monogram ZIF360NHLH Installation Instructions Manual Download

Page: 16 / 52

Installation Instructions - Standard Installation

Remove Grilles for Access to Anti-Tip Locking Hooks

Fresh Food Unit
• Open the access door.
• Remove the 4 screws from the grille.
• Pull the bottom of the grille forward, down and out to

remove.

Freezer Unit
• Open the access door.
• Remove the 4 screws from the grille.
• Pull the bottom of the grille forward, down and out to

remove.

Power Cord

Locate the power cord inside the left cavity. If it has
not been adjusted so the plug is easily accessible, do
so now.

Move Unit into Final Position
• Move appliance toward its final installed location.

Align the tabs on the wall bracket with the openings
in the back of the unit.

• The unit has “L” bolts in the upper left and right cor-

ners inside of the access compartment. These bolts
will interlock with the wall bracket and secure the unit
using the washers and hair pin cotters in the hard-
ware kit once the unit has been leveled and is in the
final position.

STEP 4 INSTALL ANTI-TIP BRACKET (cont.)

Summary of Contents for ZIF360NHLH





















































Search results

Summary of Contents for ZIF360NHLH

Reviews:

Related manuals for ZIF360NHLH

Brands by name

Popular brands

Monogram ZIF360NHLH, Installation Instructions Manual

Search results

Summary of Contents for ZIF360NHLH

Reviews:

Related manuals for ZIF360NHLH

Brands by name

Popular brands