1/4
”
FRAMED PANEL DIMENSIONS
8
If you choose to install framed panels, they must be cut
to the dimensions shown. The panels will slide into the
frame on the door, drawer and grille.
If the custom panel is less than 1/4
”
thick and if it fits
loosely in the door frame, it can be backed up with a
piece of filler material or foam tape to improve the fit.
3/4
”
OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may be installed
on trimmed models. The overlay panel must be secured to a
1/4
”
thick backer panel which slides into the trim. A spacer
panel 0.10
”
thick must be placed between the overlay and
backer panel.
Assemble the panels with glue and screws.
• Center the spacer panel on the backer panel, left to right and
top to bottom. Secure the panels with glue.
• Center the spacer and backer panel on the overlay panel and
secure with glue and screws. Screws must
be countersunk into the backer panel.
Spacer Panel
Backer Panel
Overlay Panel
Framed Panel Dimensions
A (Width)
B (Grille Height)
C (FF Height)
D (FZ Height)
1/4
”
Framed Panel
33-7/8
”
8-7/8
”
46-1/16
”
21-7/8
”
Overlay Panel Dimensions
A (Width)
B (Grille Height)
C (FF Height)
D (FZ Height)
1/4
”
Backer Panel
33-7/8
”
8-7/8
”
46-1/16
”
21-7/8
”
0.10
”
Spacer Panel
32-1/2
”
7-5/8
”
44-11/16
”
20-1/2
”
3/4
”
Overlay Panel
34-1/8
”
9
”
46-5/16
”
22
”
NOTE: Left-to-right offset is not always equal to
top-to-bottom offset.
1/4"
Panel
Door
5/16"
Trim
Reveal
IMPORTANT NOTE: Maximum total
panel weight:
• Fresh food door panel – 58 lbs.
• Freezer drawer panel – 28 lbs.
• Grille Panel – 11 lbs.
IMPORTANT NOTE: Maximum
total weight for the assembled
panels:
• Fresh food door panel – 58 lbs.
• Freezer drawer panel – 28 lbs.
• Grille Panel – 11 lbs.
Design Guide - Standard Installation
