
How to Set the Oven
Using the Temperature
The display will flash PROBE and beep if the
probe is inserted into the outlet, but the oven is not
programmed for PROBE.
oven wall.
sure it’s pushed
the way in. Close
the oven door.
1
3. Press the PROBE pad.
PROBE
1. Insert probe
into the meat.
2. Plug the probe into
the outlet on the
4. Press the INCREASE or DECREASE
BAKE
pad until desired internal probe
temperature is displayed.
5. Press the
pad.
6. Press the INCREASE or DECREASE pad.
The last oven set temperature appears in the
display. Continue pressing until the desired
oven temperature is displayed.
When the oven starts to heat, the words
ON” and the roasting temperature you set will be
in the display.
After a few seconds, the words “LO PROBE” will
replace the roasting temperature in the display.
After the internal temperature of the meat reaches
the changing internal temperature will be
shown in the display.
❑
7. When the internal temperature of
CLEAR
meat reaches the number you
OFF
have set, the probe
the oven turn
off and the oven control signals. To
stop signal, press the
pad. Use hot pads to remove the probe
from the food. Do not use tongs to pull
on it—they might damage it.
CAUTION: To prevent possible bums, do not unplug
the probe from the outlet until the oven has cooled.
Do not store the probe in the oven.
NOTE:
●
If the probe is removed from the food before the
final temperature is reached, a tone will sound and
the display will flash until the probe is removed
from the oven.
●
You will not be able to use the probe in
upper
oven during timed oven operations. This is because
with the probe you are
by temperature
rather than time.
●
You can use the timer even though you can not use
timed oven operations.
To change oven temperature during the
Roast cycle, press the
pad and then
the INCREASE or DECREASE pad to get the
new temperature.
(continued next page)
25