background image

5

IMPORTANT SAFETY INSTRUCTIONS

HOW TO CONNECT ELECTRICITY

The power cord of this appliance is
equipped with an earthing plug which
mates with a standard earthed wall outlet
to minimize the possibility of electric 
shock hazard from this appliance.

Have the wall outlet and circuit checked 
by a qualified electrician to make sure 
the outlet is properly earthed.

Where an unearthed wall outlet is
encountered, it is your personal
responsibility and obligation to have 
it replaced with a properly earthed 
wall outlet.

The refrigerator 
should always be 
plugged into its own 
individual electrical 
outlet. This provides 
the best performance 
and also prevents 
overloading house 
wiring circuits which 
could cause a fire 
hazard from overheated 
wires. Please refer to 
the rating plate on the 
refrigerator for the correct voltage, wattage
and frequency. If the product plug does
not fit your outlet, the product should be
fitted with a new plug.

IMPORTANT: The refitting of electric
plugs and cables should be done by a
qualified technician or service agent. 
In some countries the refitting of electric
plugs and cables is only permitted when
the work is completed by a qualified
technician.

If the power supply cord becomes damaged,
it must be replaced by a qualified service
agent in order to avoid a safety hazard.

Never unplug your refrigerator by pulling
on the power cord. Always grip plug firmly
and pull straight out from the outlet.

Repair or replace immediately all power
cords that have become frayed or otherwise
damaged. Do not use a cord that shows
cracks or abrasion damage along its length
or at either end.

When moving the refrigerator away from
the wall, be careful not to roll over or
damage the power cord.

Mains lead replacement

If the mains lead on your refrigerator
needs replacing at any time, it must be
replaced by a special lead which is
obtainable from your local dealer. A charge
will be made for the replacement of the
mains lead if you have damaged the lead.

The refrigerator must be positioned so that 
the plug is accessible.

SAVE THESE INSTRUCTIONS

Earthing plug

Insure proper
earthing exists
before using.

Summary of Contents for ZDWG240













Reviews: