background image

18

BEFORE USING YOUR WINE CELLAR

The appliance which you have purchased is a
wine cellar – a professional appliance intended
exclusively for keeping wines.

For best use of your appliance, please read
these instructions carefully. In them you will
find a description of the appliance and
useful tips on keeping wines.

Keep this booklet for future consultation.

1. After unpacking the appliance, make sure that

the door closes. Inform your retailer of any
damage within 24 hours.

2. Wait for at least two hours before switching

the appliance on, so that the cooling circuit
has time to reach full efficiency.

3. Make sure that the installation and electrical

connection are carried out by a qualified
engineer according to the manufacturer’s
instructions and the local rules in force.

SAFEGUARDING THE EVIRONMENT

1. Packing

The packing material is 100% recyclable and is
labelled with the recycling symbol 

. Please

dispose of all packing responsibly and carefully.
Keep the packaging material (plastic bags,
polystyrene parts, etc.) out of the reach of
children because it is potentially hazardous.

2. Scrapping/Disposal

The appliance has been made with recyclable
material.
This appliance is marked in conformity with
European Directive 2002/96/EC, Waste Electrical
and Electronic Equipment (WEEE). Making sure
that it is scrapped correctly helps to prevent any
adverse consequences for health and the
environment.

The symbol 

on the product, or on the

documents accompanying this appliance indicates
that this product should not be disposed of as
household waste. Please dispose of this appliance
at an Electrical & Electronic Equipment
Collection point as in accordance with local
environmental regulations for waste disposal.
When it is scrapped, make it unusable by cutting
the power cable and removing the doors and
shelves so that children cannot access the inside
easily.
Scrap it according to the local rules for the
disposal of waste and take it to a collection
point. Do not leave it unattended even for a few
days because it is a source of danger for children.
For details of your local Collection Point please
contact your Local Authority.

Information:

This appliance does not contain CFCs. The
refrigerant circuit contains R134a (HFC) or
R600a (HC) (see the rating plate inside the
appliance).
For appliances with Isobutane (R600a): isobutane
is a natural gas which has no effect on the
environment but is inflammable. Make sure that
the cooling circuit pipes are not damaged.

Declaration of conformity 

• This appliance has been designed,

manufactured and sold in conformity with:
- safety objectives of the "Low Voltage"
Directive 2006/95/CE (which replaces
73/23/CEE and subsequent amendments);
- the safety requirements in the "EMC"
Directive 2004/108/EEC, modified by
Directive 93/68/CEE.

The appliance's electrical safety is only assured
when it is correctly connected to an efficient
earthing system complying with legal provisions.

Summary of Contents for ARC 229















Reviews: