Mono OMEGA PLUS, Operating And Maintenance Manual

Page: 18 / 67

9b FITTING A TEMPLATE
•
Soft dough
Non-rotary templates can be fitted with nozzles. This requires screwing the
nozzles into the threaded holes provided.
Rotary templates can have plastic nozzles screwed into nozzle holders
(straight or offset).
OR
Metal nozzles secured in place by a separate nut.
1
Select template and nozzles required.
(Nozzles are not required for sheeting, staggered or stub templates)
2 Attach nozzles to template body:
3 Slide the template into the matching recess at the base of the pump assembly until
the stop is in position.
4 Tighten the nuts on the clamp strip (on underside of pump assembly) to secure
template.
NOTE. If the nuts are not securely tightened, leakage of mix will occur,
affecting deposit weights.
TEMPLATE
BODY
NOZZLES CLAMP STRIP NUTS
RECESS FOR TEMPLATE
DO NOT OPERATE MACHINE WITHOUT TEMPLATE FITTED
Omega
PLUS