Mono OMEGA PLUS, Operating And Maintenance Manual

Page: 16 / 67

FG079 –OMEGA TOUCH INCL WIRECUT 03/11 RAC
16
9.0 PREPARING FOR OPERATION
1
Select template and nozzles (and finger frame, if wirecut is to be used) and fit as
section 9a & 9b (following pages). Fill hopper with mix and close hopper cover.
2 Connect power cable to electrical supply.
Make sure stop button is in released position (turn clockwise if required).
3 Select an existing program or create a new program through the on-screen menus.
(see section 10 operation)
4 The machine is now ready for operation.
TEMPLATE
HOPPER
LIFT COVER
SCREEN
STOP BUTTON
Omega
PLUS
It is recommended that when heavy mixes are used, the inside of the hopper should be
coated with vegetable oil; for lighter mixes such as meringue, dampen with water. The oil
or water will help the mix to settle down the hopper walls and prevent air being sucked in.