FUSION Compact Bread Plant, Rev. A21 14-04-21
76
11.
Unclip and lower the rear window (
5
)
12.
Unclip
and
wipe
the rear scrapers
DO NOT WASH
.
Smear edges with vegetable oil.
13.
Scrape rollers with a
plastic
scraper and remove any debris from the
roller edges.
14.
Replace scrapers. Raise rear window. Wipe over Perspex window, with
soft cloth dampened in a sterilising solution and hot water.
15.
Open dough guides to maximum width by turning wheel (
6
).
Push pressure board (
7
) towards the main body, then withdraw.
16.
Wash board in sterilising solution and hot water, then dry and replace.
17.
Scrape dough belt (
8
) with a
plastic scraper.
18.
Brush down external surface of machine to loosen any dough
remaining.
DO NOT USE A METAL SCRAPER
OR ATTEMPT TO CLEAN
WITH WATER. BELT WILL NEED TO BE INCHED FORWARD
TO GAIN ACCESS TO ALL PARTS OF SURFACE.
SEE SAFETY INSTRUCTIONS.
8
7
6
5
UNCLIP SCRAPERS FOR CLEANING
Summary of Contents for fusion compact
