PARTS & FUNCTIONS
Body cover
3 modes setting button:
M1
- Full Power
M2
- Bleaching
M3
- Pulse
Time setting button
Charge stand
(
AC 100V~240V 50/60Hz)
Built in radiometer
Fiber optic probe
Anti-glare cone
Protective Shield
LCD display
ON / OFF / SET
(on/off, set/memory)
Charging socket
SAFETY PRECAUTIONS
Please follow instruction steps in this manual for correct and
safe operations of the device. Pay high attention to the following
warning signs beside the operation descriptions where applicable.
DANGER
─
This message appears where the operation may potentially
cause severe injury if instruction not followed correctly.
WARNING
─
This message appears where the operation may cause
serious damage or defect to other objects.
CAUTION
─
This message appears where the operation may cause
slight damage to other objects or slight bodily harm if
operation not properly conducted.
IMPORTANT
─
This message appears where the operation may involve
risk of defecting the device itself if not properly
conducted.
Sterilization for Fiber-Optic Tip:
After operation on each patient, the fiber-optic tip should be disinfected
or sterilized. Suggestion is to use autoclave 134
°
C / 75 psi for maximum
result. The sterilization time at 134
°
C should be 5 minutes.
Note:
Please disconnect the fiber-optic tip off the handpiece and
autoclave by itself.
Note:
Use of disposable sleeves is recommended.
Product Cleaning:
If there is any dirt or stains on the surface of control panel or surface
of the handpiece, please use cloth to wipe clean. If it is hard to clean,
please use a neutral cleansing agent.
Note:
Never use a solvent or volatile oil for cleaning. This can
lead to fading in the fiber optic shades.
Symbol
Explantion
Type B applied part
Attention, consult
ACCOMPANYING DOCUMENTS
Signifies the device has meet all essential requirements of
European Medical Device Directive 93/42/EEC & 2007/47/EEC.
Symbol used to indicate the polarity of the DC power input.
Direct Current
E
N
G
L
IS
H
2
3
