PROGRAMME OPTIONS EXPLAINED
AUTOMATIC (LAST DOOR) ARMING - PROGRAMMABLE
This feature is factory set in the ‘off’ position. You may have this programmed ‘on’ for added
security. The alarm will arm automatically 30 seconds after the last door is closed.
The doors will not lock so that keys cannot be locked inside
If the engine immobilises prior to the opening and closing of a door, this feature is
bypassed. Press button one to unset the immobiliser and press again to arm the system.
The opening of a door, bonnet or boot during the 30 seconds will suspend the countdown
and recommence on closure.
IGNITION SAFETY DOOR LOCK - PROGRAMMABLE
If the system has been connected to a vehicles’ central locking, the doors will lock 3 seconds after
the ignition is switched ‘on’ and unlock when the ignition is turned ‘off’.
If a door is left open for more than 3 seconds after the ignition has been turned on the safety door
lock feature will be inoperative.
SIREN CHIRPS - PROGRAMMABLE
The chirps can be permanently turned off. Only the indicators confirm the arming and disarming.
NSW SIREN TIMING – PROGRAMMABLE
It is a mandatory requirement in New South Wales, Australia, for vehicle alarm systems to sound the
siren for one trigger cycle of 30 seconds only. With this feature turned on, the indicators will flash for
any subsequent trigger.
TURBO FUNCTION – PROGRAMMABLE (not applicable to all models)
This allows an engine to remain running from a turbo timer so you can arm the bonnet, boot & doors
(and lock the doors if connected to central locking). When the turbo timer stops, the immobilisers
become active immediately and any connected sensor become active after a 10 second delay. An
intrusion through the doors whilst the engine is running will sound the alarm and immediately
immobilise the engine.
12
Summary of Contents for M60AM
Page 18: ...WIRING...
Page 24: ......