Monark novo, Manual

Page: 13 / 36

RC6 novo
13
Command type settings
Default for the two free ports is command type 0,
which will work in most cases. If you need to change
it you can do it in settings in terminal mode in the
Monark Exercise software.
Ensure that you are connected to the bike. Type ping
in the command line in the window. Then the bike
beep once and answer
pong in the text window above
the command line, see Fig: Terminal window .
You can set the command type for both ports
regardless of which port the bike is connected to. Use
the following commands:
• cmdtypers232 # and press ENTER to set the
RS232 port to the command type #, where # is
0, 2, 3 or 4
• cmdtypeusb #
and press ENTER to set the USB
port to the command type #, where # is 0, 2, 3
or 4
If you only send the command cmdtypers232
alternatively cmdtypeusb without digit, the bike
responds with the current command type (0, 2, 3 or
4) for the connection.
Fig: Terminal window
Command
line
Bike answer
Set commando type for the RS232 port
When power is turned on to the bike gives an
indication of what command type the RS232 port is
set to. First, a long beep followed by the same number
of short beeps is the command type settings for the
RS232 port. In default ("0") you do not hear a short
beep, but at normal Ergoline setting ("2"), you hear
two short beeps after the long beep.
0 — A long beep
2 — A long beep followed by two short beeps
3 — A long beep followed by three short beeps
4 — A long beep followed by four short beeps
Monark test software
Monark test software is available for free download
from our website: www.monarkexercise.se. If you
use a PC with touch screen, we recommend you to
also download the
Monark Touch software which
is adapted for that type of screens with a custom
graphics with larger and clearer buttons.
Insert the desired cable between the bike and the
computer and start the PC software. Normally the
bike and computer connect automatically. If not,
read the software reference information or contact
software support by writing an email in English to
the software developer HUR Labs support: support@
hurlabs.com.
Other external PC software
Other external PC software that is compatible with
the bike can also be used. Normally you have to
choose the correct COM port in the PC software. See
the PC software manual.
Terminal mode PC
A variety of settings can be made from the software.
For more information about this see the software's
help file.
Settings can also be made directly from the PC through
the terminal mode, see the
Technichal Manual which
is available from Monark Exercise AB.