Monark Cardio Care 827 E, Manual

Page: 9 / 32

Monark Cardio Care 827 E
9
Ser
vice
Fig: Batteries
1) km/mile
Batteries
The batteries are in a separate package at deli-
very. The batteries may need to be replaced upon
assembly. To replace the batteries at any time,
take the meter out of the housing by bending up
in the lower end with a coin or similar. The bat-
teries, 2 x 1.5V size AA(R6), which are placed in
the holder on the backside of the meter, can then
easily be changed. See fig: Batteries.
After the batteries has been replaced all segments
in the display are visible and a buzzer will sound
for two seconds. After 2 seconds the meter turns
to main display again and normal function. Put
the meter into the housing again.
Note:
On the backside of the meter is a switch to
change meter function from km to mile or mile
to km(1).
Fig: Brake belt
1) Adjustment nut
Replacement of brake belt
Remove the left or the right frame cover by undo-
ing the mounting screws (5pcs). Put the crank in
a backward position. Move the cover somewhat
out in the front end and then take it backwards
to remove it. Set the tension device in the mini-
mum position. Loosen the brake belt a little more
if needed at the adjustment nut. Remove the old
brake belt from the spring and tensioner. Attach
the new brake belt and assemble the bike in re-
verse order.
Adjust the brake belt at the adjustment nut(1) so
that resistance increases as soon as a the tension
device is turned a little.
When replacing the brake belt it is recommen-
ded to clean the brake surface. See section ”Brake
belt contact surface”.
1
1
Crank bearing
The crank bearing is long term greased and needs
normally no supplementary lubrication. If pro-
blem arises, please contact your Monark dealer.
Flywheel bearing
The bearings in the flywheel are lifetime greased
and require normally no maintenance. If problem
arises, please contact your Monark dealer.