Cartridges and Membranes layout
(1). Sediment Cartridge
(2). Carbon Cartridge
(3). Membranes (one situated in rear of unit)
(4). Carbon Cartridge
Membrane replacement
The ROF700 has 3no membranes. They are all inserted during unit manufacture prior to use and tested for leaks.
Two are situated in the front section of the unit and one in the rear section.
Remove the front section cover by gently squeezing side walls of front cover whilst pulling cover off. The rear section can
then be removed by undoing the 4no recessed and 1no surface mounted brass screw (behind left hand membrane) in the
dark grey plastic main body.
Remove the membrane from its holding clip and release the compression connection in the cap and remove cap as pictured
left. Remove membrane from its sealed bag and insert as per same picture.
IMPORTANT:
Ensure double ‘o’ ring seals on inserted end of membrane locate securely in female insert in base of membrane housing.
Repeat the above until all membranes are inserted.
Refit membrane cap, then reseal compression compressions.
Refit all membrane housings in position.
