MENU buon POWER buon On
-
Target Indicator Joysck Arrows
Figure 3 Object rotang at 3000 RPM
NOTE: If doubling or halving the flash rate causes the strobe
to exceed its range, the display flash rate will remain at the
current flash value.
4.2
LASER Mode
(oponal accessory)
The Laser Mode is only available when the oponal Laser Module
is installed.
This mode uses the LASER to trigger the strobe flash.
Laser icon will blink when Laser Mode is enabled and be on
solid when trigger is pulled and laser is on.
By pulling the trigger and aiming the laser at a reflecve target on
the rotang or reciprocang machine, the strobe will flash each me
a reflecon is received allowing the user to virtually “stop moon”.
On-Target indictor will show on the display when target is detected
by laser.
The flash rate (speed) will be displayed in the selected units.
See Figure 4.
11
One target
@ 1,500 FMP
EVERY OTHER ROTATION
( 2)
One target
@ 3,000 FMP
ONCE EVERY ROTATION
(0)
Two targets
@ 6,000 FMP
TWICE PER ROTATION
(X2)
Four targets
@ 12,000 FMP
FOUR TIMES PER ROTATION
(X2)
(X2)
