MENU buon POWER buon On
-
Target Indicator Joysck Arrows
rate. If the adjustment was in me, the strobe will have a fixed duraon
irrespecve of the flash rate.
This is a live adjustment—if the trigger is depressed, the effect of
changing the brightness can be seen immediately.
5.3.1
Degrees
Press the MENU buon to enter the BRITE menu. The current
flash duraon will be shown in degrees.
Use the arrows on the joysck to adjust the flash duraon
in degrees -
refer to secon 4.1.1. Degrees can be set from 0.1°
to 14°.
Press the MENU buon followed by the Power buon to save
the degree seEng.
5.3.2
Time
To set the flash duraon in me instead of degrees, press the
MENU buon again (skip the DEG menu).
Use the arrows on the joysck to adjust to the me value. Time
can be set from 0.001 mSec to 2.000 mSec.
Press the MENU buon followed by the Power buon to save
the me seEng.
5.4
DECPT (Decimal Point) Menu
The Decimal Point menu adjusts the resolution of the Flash/Tach rate
displayed. Up to three places after the decimal point can be shown.
The number of decimal places is limited by the 6-digits available and
the unit will auto range to show the maximum number of digits after
the decimal point selected by the user. The choices are NONE, 1, 2, 3.
15
