Monacor WAP-7D, Instruction Manual

Page: 8 / 30

English
8
Deutsch
Deutsch Seite
Français
Français Page
Italiano
Italiano Pagina
Español
Español Página
Nederlands
Nederlands Pagina
Polski
Polski Strona
Dansk
Dansk Sida
Svenska
Svenska Sidan
Suomi
Suomi Sivulta
Portable Digital Voice Amplifier
These instructions are intended for users without any spe-
cific technical knowledge . Please read these instructions
carefully prior to operating the unit and keep them for
later reference . All operating elements and connections
de scribed can be found on the fold-out page 3 .
1 Operating Elements and Accessories
1 Battery status indication and power indication
blue = unit is switched on, battery sufficiently charged
yellow = battery must be recharged
green = battery is fully charged
red
= battery is being charged
2 Retaining elements for the fixing plate (D)
3 VOLUME control
4
ON / OFF switch
5 3 .5 mm jack MIC for one of the microphones
6 3 .5 mm jack LINE for connection of a unit with line out-
put (e . g . CD / MP3 player, radio)
7
Jack DC IN for the charger
A Miniature electret microphone with clip
B Electret headband microphone
C
Belt clip
D Fixing plate for the neckband (F) / the belt (G)
E
Charger
F Neckband
G Carrying belt
H Connection cable for an audio unit with line output
I Microphone extension cable
– Transport bag (not shown)
2 Safety Notes
The WAP-7D and the charger correspond to all relevant
directives of the EU and are therefore marked with .
WARNING The plug-in charger uese dangerous mains
voltage . Leave servicing of the charger to
skilled personnel only . Inexpert handling or
modification of the charger may result in elec-
tric shock .
•
The charger is suitable for indoor use only . The WAP-7D
and the accessories are also suitable for outdoor applica-
tions if they are not exposed to precipitation or humidity .
•
In any case protect all parts against dripping water and
splash water, high air humidity and heat (admissible am-
bient temperature range 0 – 40 °C) .
•
Do not set the charger into operation, and immediately
disconnect it from the mains socket if
1 . there is visible damage to the WAP-7D or to the charger,
2 . a defect might have occurred after the unit was
dropped or suffered a similar accident,
English
English Page